Tips:
* If you are using the same materials as I do, change your transporter and the presser foot whit a silicon one. If you don't than you can't sew those materials.
* Be careful whit the silicone based materials! They large under sewing because of the pressure of the sewing feet, reducing the sewing pressure it wont change a lot. You can pull the thread but it might cut the material.
Pull the thread a lill bit (only if you worked with thick materials before), change your transporter and the foot (you can use silicon based spay which gives 30 min viscosity), adjust the sewing steps on ~3 steps/1 cm. This will work impeccable indifferent the sewing machine type.
This DIY was sponsored by SPERETRIK SRL from Miercurea Ciuc.
I hope you like it! If you have question or you need a specific pattern please contact us here.
No comments:
Post a Comment